The TX100 connects one HDMI 2.0 input and three HDMI 1.4 inputs, supporting a single 4K source or four independent HD streams. Loop-through functionality allows local monitoring of a 4K workstation without impacting network distribution.
Onboard SQX encoding allows compressed streams to be sent over a 1G network, enabling low-bandwidth endpoints to receive HD content while full 4K streams continue over the 10G network.
Each input supports low-latency KVM via front-mounted USB 2.0 interfaces, giving operators direct control over connected sources.
The TX100 also supports Direct Connect mode for simple point-to-point connections with RX100 receivers. AES encryption and genlock ensure secure, reliable streaming.
| Input Connections | 4 x HDMI 1 x 2.0 3 x 1.4 Supports single 4K input or 4 x HD inputs |
| HDCP Support | HDCP v2.2 or v1.4 (input 1), HDCP 1.4 only (inputs 2-4) |
| HDMI Pixel Clock Maximum | 600 MHz @ 8-bit 4:4:4 (Input 1) 150MHz @ 8bit 4:4:4 (Inputs 2-4) |
| HDMI Pixel Clock Minimum | 25 MHz |
| Typical resolutions HD Stream | Up to 150Mpixels/sec, maximum line length 2048 Examples: 1920 x 1080p at 60Hz (SMPTE timings) 1920 x 1200p at 60Hz (CVT-Reduced Blanking) 2048 x 1080p at 60Hz (CVT-Reduced Blanking) |
| Typical Resolutions, 4K Stream | Up to 600Mpixels/sec, maximum line length 4096 Examples: 3840 x 2160p at 60Hz (SMPTE timings) 4096 x 2160p at 60Hz (CVT-Reduced Blanking) |
| Scan Type | Progressive. Interlaced video not supported. |
| Video Sampling Formats [1] 10,12-bit modes coming soon | RGB 8-bit, RGB 10-bit[1],YCbCr 4:4:4 8-bit, YCbCr 4:4:4 10-bit[1], YCbCr 4:2:2 12-bit[1], YCbCr 4:2:0 |
| Streaming Codecs and Profiles | DS10G by Datapath (visually lossless & low latency over 10Gb network) Additional H.264 SQX streaming at source resolution for each port |
| Network Connections | 1x 10Gb SFP+ Fiber port (Lossless streaming interface), Note: Compatible 850nm multi-mode SFP modules are available as a separate accessory. 1x 1Gb RJ45 (Control/Management/Streaming port) |
| Multicast Streaming Support | Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch. |
| Audio Support | Transmit stereo HDMI embedded audio for each input independently routable to mulitple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling. |
| KVM Support | 4x Type-B USB hosts ports for connecting to a USB host PC. HID device support (keyboard, mouse etc.) independently routable to sink. |
| Power Consumption | 19W: 4 HD in, HD loop out, 10G, 1G and USB ports active. 17W: 4K in, 4K loop out, 10G, 1G and USB ports active. |
| Mechanical | 205mm (l) x 162mm (w) x 34mm (h) |
| Weight | 1Kg |
| Relative Humidity | 5%-90% non-condensing |