Aligo TX100 SQX

Single 4K Transmitter with Quad HD Inputs and SQX Encoding
Delivering unprecedented quality and flexibility in IP content distribution.
  • Single HDMI 2.0 and 3 x HDMI 1.4 inputs supporting a single 4K input or 4 x HD inputs.
  • Supports loop through for local monitoring of a 4K workstation.
  • On-board SQX encoding enables compressed content to be sent to a 1G network.
  • Low latency KVM is supported for each source via the onboard USB 2.0 interfaces.

Aligo TX100 SQX

Single 4K Transmitter with Quad HD Inputs and SQX Encoding
Delivering unprecedented quality and flexibility in IP content distribution.
  • Single HDMI 2.0 and 3 x HDMI 1.4 inputs supporting a single 4K input or 4 x HD inputs.
  • Supports loop through for local monitoring of a 4K workstation.
  • On-board SQX encoding enables compressed content to be sent to a 1G network.
  • Low latency KVM is supported for each source via the onboard USB 2.0 interfaces.

Flexible 1G KVM Deployment

Introducing new 1G KVM capability, the Aligo TX100 SQX enables high-quality video and KVM control over standard 1G networks. Using H.264 or H.265 encoding with SQX technology, streams can be delivered to video walls and Aetria workstations—providing a practical alternative where 10G infrastructure is unavailable or not achievable.

Multi-Source HDMI Input Support

Featuring 1 x HDMI 2.0 and 3 x HDMI 1.4 inputs, the unit supports either a single 4K source or up to four HD inputs.

Dedicated SQX Encoding

Integrated SQX encoding compresses content for efficient transmission across 1G networks to compatible KVM endpoints.

KVM Control

Each connected source supports KVM functionality via onboard USB 2.0 interfaces, enabling seamless keyboard and mouse control across all connected sources.

Rack Mount Installation

When installed in a 1U rack mount kit, the TX100 SQX requires 2U of rack space to ensure effective rear cable management.

Aligo TX100 SQX Specifications

Input Connections 4 x HDMI 1 x 2.0 3 x 1.4
Supports single 4K input or 4 x HD inputs
HDCP Support HDCP v2.2 or v1.4 (input 1), HDCP 1.4 only (inputs 2-4)
HDMI Pixel Clock Maximum 600 MHz @ 8-bit 4:4:4 (Input 1)
150MHz @ 8bit 4:4:4 (Inputs 2-4)
HDMI Pixel Clock Minimum 25 MHz
Typical resolutions HD Stream Up to 150Mpixels/sec, maximum line length 2048
Examples:
1920 x 1080p at 60Hz (SMPTE timings)
1920 x 1200p at 60Hz (CVT-Reduced Blanking)
2048 x 1080p at 60Hz (CVT-Reduced Blanking)
Typical Resolutions, 4K Stream Up to 600Mpixels/sec, maximum line length 4096
Examples:
3840 x 2160p at 60Hz (SMPTE timings)
4096 x 2160p at 60Hz (CVT-Reduced Blanking)
Scan Type Progressive. Interlaced video not supported.
Video Sampling Formats [1] 10,12-bit modes coming soon RGB 8-bit, RGB 10-bit YCbCr 4:2:0
Streaming Codecs and Profiles D1Gigabit H.264/H.265 SQX streaming at source resolution for each port with KVM
Network Connections 1x 10Gb SFP+ Fiber Port (reserved for future use)
1x 1Gb RJ45 (Control/Management/Streaming port)
Multicast Streaming Support Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch.
Audio Support Transmit stereo HDMI embedded audio for each input to multiple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling.
KVM Support 4x Type-B USB hosts ports for connecting to a USB host PC.
HID device support (keyboard, mouse etc.) independently routable to sink.
Power Consumption 19W: 4 HD in, HD loop out, 10G, 1G and USB ports active.
17W: 4K in, 4K loop out, 10G, 1G and USB ports active.
Mechanical 205mm (l) x 162mm (w) x 34mm (h)
Weight 1Kg
Relative Humidity 5%-90% non-condensing

Description

Flexible 1G KVM Deployment

Introducing new 1G KVM capability, the Aligo TX100 SQX enables high-quality video and KVM control over standard 1G networks. Using H.264 or H.265 encoding with SQX technology, streams can be delivered to video walls and Aetria workstations—providing a practical alternative where 10G infrastructure is unavailable or not achievable.

Multi-Source HDMI Input Support

Featuring 1 x HDMI 2.0 and 3 x HDMI 1.4 inputs, the unit supports either a single 4K source or up to four HD inputs.

Dedicated SQX Encoding

Integrated SQX encoding compresses content for efficient transmission across 1G networks to compatible KVM endpoints.

KVM Control

Each connected source supports KVM functionality via onboard USB 2.0 interfaces, enabling seamless keyboard and mouse control across all connected sources.

Rack Mount Installation

When installed in a 1U rack mount kit, the TX100 SQX requires 2U of rack space to ensure effective rear cable management.

Aligo TX100 SQX Specifications

Input Connections 4 x HDMI 1 x 2.0 3 x 1.4
Supports single 4K input or 4 x HD inputs
HDCP Support HDCP v2.2 or v1.4 (input 1), HDCP 1.4 only (inputs 2-4)
HDMI Pixel Clock Maximum 600 MHz @ 8-bit 4:4:4 (Input 1)
150MHz @ 8bit 4:4:4 (Inputs 2-4)
HDMI Pixel Clock Minimum 25 MHz
Typical resolutions HD Stream Up to 150Mpixels/sec, maximum line length 2048
Examples:
1920 x 1080p at 60Hz (SMPTE timings)
1920 x 1200p at 60Hz (CVT-Reduced Blanking)
2048 x 1080p at 60Hz (CVT-Reduced Blanking)
Typical Resolutions, 4K Stream Up to 600Mpixels/sec, maximum line length 4096
Examples:
3840 x 2160p at 60Hz (SMPTE timings)
4096 x 2160p at 60Hz (CVT-Reduced Blanking)
Scan Type Progressive. Interlaced video not supported.
Video Sampling Formats [1] 10,12-bit modes coming soon RGB 8-bit, RGB 10-bit YCbCr 4:2:0
Streaming Codecs and Profiles D1Gigabit H.264/H.265 SQX streaming at source resolution for each port with KVM
Network Connections 1x 10Gb SFP+ Fiber Port (reserved for future use)
1x 1Gb RJ45 (Control/Management/Streaming port)
Multicast Streaming Support Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch.
Audio Support Transmit stereo HDMI embedded audio for each input to multiple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling.
KVM Support 4x Type-B USB hosts ports for connecting to a USB host PC.
HID device support (keyboard, mouse etc.) independently routable to sink.
Power Consumption 19W: 4 HD in, HD loop out, 10G, 1G and USB ports active.
17W: 4K in, 4K loop out, 10G, 1G and USB ports active.
Mechanical 205mm (l) x 162mm (w) x 34mm (h)
Weight 1Kg
Relative Humidity 5%-90% non-condensing

Description

Flexible 1G KVM Deployment

Introducing new 1G KVM capability, the Aligo TX100 SQX enables high-quality video and KVM control over standard 1G networks. Using H.264 or H.265 encoding with SQX technology, streams can be delivered to video walls and Aetria workstations—providing a practical alternative where 10G infrastructure is unavailable or not achievable.

Multi-Source HDMI Input Support

Featuring 1 x HDMI 2.0 and 3 x HDMI 1.4 inputs, the unit supports either a single 4K source or up to four HD inputs.

Dedicated SQX Encoding

Integrated SQX encoding compresses content for efficient transmission across 1G networks to compatible KVM endpoints.

KVM Control

Each connected source supports KVM functionality via onboard USB 2.0 interfaces, enabling seamless keyboard and mouse control across all connected sources.

Rack Mount Installation

When installed in a 1U rack mount kit, the TX100 SQX requires 2U of rack space to ensure effective rear cable management.

Specification

Aligo TX100 SQX Specifications

Input Connections 4 x HDMI 1 x 2.0 3 x 1.4
Supports single 4K input or 4 x HD inputs
HDCP Support HDCP v2.2 or v1.4 (input 1), HDCP 1.4 only (inputs 2-4)
HDMI Pixel Clock Maximum 600 MHz @ 8-bit 4:4:4 (Input 1)
150MHz @ 8bit 4:4:4 (Inputs 2-4)
HDMI Pixel Clock Minimum 25 MHz
Typical resolutions HD Stream Up to 150Mpixels/sec, maximum line length 2048
Examples:
1920 x 1080p at 60Hz (SMPTE timings)
1920 x 1200p at 60Hz (CVT-Reduced Blanking)
2048 x 1080p at 60Hz (CVT-Reduced Blanking)
Typical Resolutions, 4K Stream Up to 600Mpixels/sec, maximum line length 4096
Examples:
3840 x 2160p at 60Hz (SMPTE timings)
4096 x 2160p at 60Hz (CVT-Reduced Blanking)
Scan Type Progressive. Interlaced video not supported.
Video Sampling Formats [1] 10,12-bit modes coming soon RGB 8-bit, RGB 10-bit YCbCr 4:2:0
Streaming Codecs and Profiles D1Gigabit H.264/H.265 SQX streaming at source resolution for each port with KVM
Network Connections 1x 10Gb SFP+ Fiber Port (reserved for future use)
1x 1Gb RJ45 (Control/Management/Streaming port)
Multicast Streaming Support Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch.
Audio Support Transmit stereo HDMI embedded audio for each input to multiple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling.
KVM Support 4x Type-B USB hosts ports for connecting to a USB host PC.
HID device support (keyboard, mouse etc.) independently routable to sink.
Power Consumption 19W: 4 HD in, HD loop out, 10G, 1G and USB ports active.
17W: 4K in, 4K loop out, 10G, 1G and USB ports active.
Mechanical 205mm (l) x 162mm (w) x 34mm (h)
Weight 1Kg
Relative Humidity 5%-90% non-condensing