Aligo QTX100

Quad 4K Transmitter with SQX Encoding
Delivering unprecedented quality and flexibility in IP content distribution.
  • Connects up to four HDMI 2.0 inputs (4K60) to your 10G AV network. Use in conjunction with a VSN controller to distribute up to 16 independent HD outputs per unit.
  • On-board SQX encoding enables compressed content to be sent to a 1G network.
  • Low latency KVM is supported for each source via the onboard USB 2.0 interfaces.
  • Independent routing of Video and embedded Audio channels.

Aligo QTX100

Quad 4K Transmitter with SQX Encoding
Delivering unprecedented quality and flexibility in IP content distribution.
  • Connects up to four HDMI 2.0 inputs (4K60) to your 10G AV network. Use in conjunction with a VSN controller to distribute up to 16 independent HD outputs per unit.
  • On-board SQX encoding enables compressed content to be sent to a 1G network.
  • Low latency KVM is supported for each source via the onboard USB 2.0 interfaces.
  • Independent routing of Video and embedded Audio channels.

Flexible Multi-Input Transmission

The QTX100 supports four HDMI 2.0 inputs at 4K60, delivering high-quality visual content across the Aligo network. Each input can be transmitted as a full 4K stream or as multiple HD outputs via a VSN controller, supporting up to 16 independent HD outputs per unit.

Simultaneous SQX Streams

Onboard SQX encoding enables compressed content to be sent over 1G or 10G networks, allowing flexible redistribution without impacting high-resolution streams.

Low-Latency KVM Control

Operators can interact with connected sources using the front-mounted USB HID interfaces, providing low-latency KVM control for each input.

Direct Connect for Quick Deployment

The QTX100 supports Direct Connect mode, automatically linking to an Aligo receiver for plug-and-play point-to-point operation, while maintaining AES encryption and genlock compatibility.

Aligo QTX100 Specifications

Video Input Connections 4 x HDMI 2.0 full size connectors
HDCP Support HDCP v2.2
HDMI Pixel Clock Maximum 600 MHz
HDMI Pixel Clock Minimum 25 MHz
Typical Resolutions, HD Stream Up to 150Mpixels/sec, maximum line length 2048
Examples:
1920x1080p 60Hz (SMPTE timings)
1920x1200p 60Hz (CVT-Reduced Blanking)
2048x1080p 60Hz (CVT-Reduced Blanking)
Typical Resolutions, 4K Stream Up to 600Mpixels/sec, maximum line length 4096
Examples:
3840x2160p 60Hz (SMPTE timings)
4096x2160p 60Hz (CVT-Reduced Blanking)
Scan Type Progressive. Interlaced video not supported.
Video Sampling Formats [1] 10,12-bit modes coming soon RGB 8-bit, RGB 10-bit[1],YCbCr 4:4:4 8-bit, YCbCr 4:4:4 10-bit[1], YCbCr 4:2:2 12-bit[1], YCbCr 4:2:0
Streaming Codecs and Profiles DS10G by Datapath (visually lossless & low latency over 10Gb network)
Additional H.264 SQX streaming at source resolution for each port
Network Connections 4x 10Gb SFP+ Fiber ports (Lossless streaming interface), Note: Compatible 850nm multi-mode SFP modules are available as a separate accessory.
1x 1Gb RJ45 (Control/Management port)
1x 1Gb RJ45 (Media port for SQX streaming)
Multicast Streaming Support Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch.
Maximum Sources Per System At least 220 (UHD), 650 (HD)
Audio Support Transmit stereo HDMI embedded audio for each input independently routable to multiple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling.
KVM Support 4 x Type-B USB host ports for connecting to a USB host PC
HID device support (keyboard, mouse etc.) independently routable to sink
Power Consumption 35W
Mechanical 318 x 176 x 43 mm
Weight 1.8Kg
Relative Humidity 5%-90% non-condensing

Description

Flexible Multi-Input Transmission

The QTX100 supports four HDMI 2.0 inputs at 4K60, delivering high-quality visual content across the Aligo network. Each input can be transmitted as a full 4K stream or as multiple HD outputs via a VSN controller, supporting up to 16 independent HD outputs per unit.

Simultaneous SQX Streams

Onboard SQX encoding enables compressed content to be sent over 1G or 10G networks, allowing flexible redistribution without impacting high-resolution streams.

Low-Latency KVM Control

Operators can interact with connected sources using the front-mounted USB HID interfaces, providing low-latency KVM control for each input.

Direct Connect for Quick Deployment

The QTX100 supports Direct Connect mode, automatically linking to an Aligo receiver for plug-and-play point-to-point operation, while maintaining AES encryption and genlock compatibility.

Aligo QTX100 Specifications

Video Input Connections 4 x HDMI 2.0 full size connectors
HDCP Support HDCP v2.2
HDMI Pixel Clock Maximum 600 MHz
HDMI Pixel Clock Minimum 25 MHz
Typical Resolutions, HD Stream Up to 150Mpixels/sec, maximum line length 2048
Examples:
1920x1080p 60Hz (SMPTE timings)
1920x1200p 60Hz (CVT-Reduced Blanking)
2048x1080p 60Hz (CVT-Reduced Blanking)
Typical Resolutions, 4K Stream Up to 600Mpixels/sec, maximum line length 4096
Examples:
3840x2160p 60Hz (SMPTE timings)
4096x2160p 60Hz (CVT-Reduced Blanking)
Scan Type Progressive. Interlaced video not supported.
Video Sampling Formats [1] 10,12-bit modes coming soon RGB 8-bit, RGB 10-bit[1],YCbCr 4:4:4 8-bit, YCbCr 4:4:4 10-bit[1], YCbCr 4:2:2 12-bit[1], YCbCr 4:2:0
Streaming Codecs and Profiles DS10G by Datapath (visually lossless & low latency over 10Gb network)
Additional H.264 SQX streaming at source resolution for each port
Network Connections 4x 10Gb SFP+ Fiber ports (Lossless streaming interface), Note: Compatible 850nm multi-mode SFP modules are available as a separate accessory.
1x 1Gb RJ45 (Control/Management port)
1x 1Gb RJ45 (Media port for SQX streaming)
Multicast Streaming Support Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch.
Maximum Sources Per System At least 220 (UHD), 650 (HD)
Audio Support Transmit stereo HDMI embedded audio for each input independently routable to multiple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling.
KVM Support 4 x Type-B USB host ports for connecting to a USB host PC
HID device support (keyboard, mouse etc.) independently routable to sink
Power Consumption 35W
Mechanical 318 x 176 x 43 mm
Weight 1.8Kg
Relative Humidity 5%-90% non-condensing

Description

Flexible Multi-Input Transmission

The QTX100 supports four HDMI 2.0 inputs at 4K60, delivering high-quality visual content across the Aligo network. Each input can be transmitted as a full 4K stream or as multiple HD outputs via a VSN controller, supporting up to 16 independent HD outputs per unit.

Simultaneous SQX Streams

Onboard SQX encoding enables compressed content to be sent over 1G or 10G networks, allowing flexible redistribution without impacting high-resolution streams.

Low-Latency KVM Control

Operators can interact with connected sources using the front-mounted USB HID interfaces, providing low-latency KVM control for each input.

Direct Connect for Quick Deployment

The QTX100 supports Direct Connect mode, automatically linking to an Aligo receiver for plug-and-play point-to-point operation, while maintaining AES encryption and genlock compatibility.

Specification

Aligo QTX100 Specifications

Video Input Connections 4 x HDMI 2.0 full size connectors
HDCP Support HDCP v2.2
HDMI Pixel Clock Maximum 600 MHz
HDMI Pixel Clock Minimum 25 MHz
Typical Resolutions, HD Stream Up to 150Mpixels/sec, maximum line length 2048
Examples:
1920x1080p 60Hz (SMPTE timings)
1920x1200p 60Hz (CVT-Reduced Blanking)
2048x1080p 60Hz (CVT-Reduced Blanking)
Typical Resolutions, 4K Stream Up to 600Mpixels/sec, maximum line length 4096
Examples:
3840x2160p 60Hz (SMPTE timings)
4096x2160p 60Hz (CVT-Reduced Blanking)
Scan Type Progressive. Interlaced video not supported.
Video Sampling Formats [1] 10,12-bit modes coming soon RGB 8-bit, RGB 10-bit[1],YCbCr 4:4:4 8-bit, YCbCr 4:4:4 10-bit[1], YCbCr 4:2:2 12-bit[1], YCbCr 4:2:0
Streaming Codecs and Profiles DS10G by Datapath (visually lossless & low latency over 10Gb network)
Additional H.264 SQX streaming at source resolution for each port
Network Connections 4x 10Gb SFP+ Fiber ports (Lossless streaming interface), Note: Compatible 850nm multi-mode SFP modules are available as a separate accessory.
1x 1Gb RJ45 (Control/Management port)
1x 1Gb RJ45 (Media port for SQX streaming)
Multicast Streaming Support Each source is available at any number of displays in parallel. Requires IGMPv2 enabled at network switch.
Maximum Sources Per System At least 220 (UHD), 650 (HD)
Audio Support Transmit stereo HDMI embedded audio for each input independently routable to multiple sinks. The embedded audio consists of up to four channel pairs encoded in PCM format, up to 96KHz sampling.
KVM Support 4 x Type-B USB host ports for connecting to a USB host PC
HID device support (keyboard, mouse etc.) independently routable to sink
Power Consumption 35W
Mechanical 318 x 176 x 43 mm
Weight 1.8Kg
Relative Humidity 5%-90% non-condensing