Capture four DVI-I High Definition DVI streams in a single capture card.
The VisionHD4 is an eight lane PCI Express capture card with four independent video capture channels, supporting HD capture.
This video capture card provides a high-performance, high-density video capture solution for control rooms, medical venues, and other applications that require high-capture bandwidth. The quad HD capture capability in combination with Datapath’s multi stream and synchronisation features enables resolutions up to 4096×2048 and Quad HD solutions.
The VisionHD4 captures all four HD video channels simultaneously and triple buffers them into onboard storage for tear free video, alongside embedded HDMI audio streams can also be captured from each channel.
This full length video capture card has four capture processors, each providing 800 MB/s bandwidth.
For additional security and peace of mind, our customers are invited to take advantage of Datapath’s advanced swap out service and extended warranty. For a small premium, selected products can be protected by our advanced swap out service and optional 5 year warranty. For more information please contact our sales team.
For application case studies using this capture card:
Highway control relies on video capture and graphics technology (Malaysia)
Video capture and graphics technology riding on the Prasara Rapid Bus (Kuala Lumpur)
| Board Format | Full size 8 lane PCIe 3-0 interface, 111mm x 312mm (H x L) |
| Connectors | Two DMS59 high density video connectors |
| Maximum Sample Rate | 170 Mpixels per second analogue RGB or 165 MHz DVI Analogue modes up to 340 MHz pixel clock can be captured using dual-pass sampling |
| Maximum Data Rate | 800 MB/s bandwidth per capture processor, 3.2 GB/s for the card |
| Video Sampling | RGB: 24 bits per pixel/ 8-8-8 format |
| Video Capture Memory | 256 MB per capture channel, triple buffered |
| Analogue RGB Mode Support | 640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200 and custom modes |
| DVI Single-Link Mode Support | 640×480, 800×600, 1024×768, 1280×1024, 1600×1200, 1920×1080, 1920×1200 and custom modes |
| HD Modes | 1080p, 1080i, 720p, 576p, 480p and 480i using a Component-DVI connector. For HDCP support contact the sales department for more information |
| Input Modes Detection | Direct DMA to physical or virtual memory buffers with full scatter-gather support DMA bandwidth: up to 800MB/s 16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters |
| Pixel Transfer Formats | RGB: 5-5-5, 5-6-5 or 8-8-8 (24 bit, 32 bit) pixels YUV: 16 bit (4:2:2) MONO: 8 bit |
| Update Rate | User defined, capture frame rate will match the source providing max data rate (800MB/s) is not exceeded. Multi-buffered to eliminate tearing artifacts |
| Video Format Options | Analogue RGB plus HSync and VSync (5 wire) Analogue RGB with Composite Sync (4 wire) Analogue RGB with sink on Green/ YPbPr (3 wire)DVI Single Link, HDMI 1.3 |
| Operating system support | Up to Windows® 10 and Linux support (NOTE: Check Linux specific features with Sales) |
| Power Requirements | Max current at 1.9A @ 12V Max current at 2.5A @ 3.3A Max power 31 Watts |
| Operating Temperature | 0 to 35 °C/ 32 to 96 °F |
| Storage Temperature | 20 to 70 °C/ -4 to 158 °F |
| Relative Humidity | 5% to 90% non-condensing |
| Warranty | 3 years |
We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.