Aetria Network Manager is pre-configured with Aetria Command Center and is fully compatible with Aetria Workstation, Arqa and Aligo.
| Processor | Intel XEON E-2434 3.6G |
| Memory | 16GB UDIMM 5600MT/s ECC |
| Storage | 480GB SSD |
| Supported System | Datapath Aetria Network Manager & Command Center |
| Supported OS | Linux |
| Browser Access | Safari, Edge, Chrome |
| Security | HTTPS, TLS, TPM1.2/2.0, SecureBoot, Cryptographically signed firmware. Silicon root of trust. |
| Ethernet | 2×100/1000Mbps full/half duplex |
| I/O & Ports | 1 x front panel USB 2.0, 2 x USB 3.0 real panel, 1x IDRAC, VGA, serial connector |
| Power Supply | Dual hot plug redundant PSU 350W |
| Chassis Dimensions | Width: 434mm, Depth: 595mm |
| Form Factor | 1U Rackmount |
| Weight | 13.6 KG |
| Environmental Temperature | -40 ºC to 65 ºC |
| Environmental Humidity | 5-95% with 33 ºC dew point, non-condensing |
| Environmental Shock | Six consecutively executed pulses in positive and negative x,y,z planes each side of the system of 71G for up to 2ms |
| Environmental Vibration | 1.88 Grms @10-500Hz for 15min |
| Operating Temperature | 10-35 degC continuous operation (up to 950m above sea level) |
| Operating Humidity | 10-80% RH with 29 ºC dew point, non-condensing |
| Operating Shock | One pulse each side of the system of 71G for up to 2ms |
| Operating Vibration | 1.88 Grms @10-500Hz for 15min |
| Noise Level | Max 38 dB(A) |
| Compliance | CE, CB, UL, EAC, CCC, BIS, FCC |